Details On Van Compass Suspension Systems Stages 1 through 6:

4×4 Sprinters are very capable and versatile vehicles, however many Sprinters have stiff factory ride over small bumps and extreme swaying on uneven ruts. Van Compass has developed a custom tuned FOX shock kit to improve the Sprinter’s handling both on and off the trail. Sprinter Engineering is an authorized reseller of the Van Compass Suspension Packages Stages 1 through 6 and Sprinter Engineering does installations as well by quote.

Van Compass’ custom tuned Fox shocks smooth out the harshness experienced on washboard roads and sharp, abrupt impacts. The bounce experienced over large bumps is reduced and the side to side sway over uneven surfaces is minimized.  Each set of Fox shocks are specifically tuned per application. They have added a set of front sumo springs to increase spring rate, stability and bottoming out. This kit is recommended for light, high roof crew and cargo vans. If installation is done by Sprinter Engineering, please allow 3-5 days for us to tune shocks after your order is placed. ** SHOCK DUST BOOTS INCLUDED **There are six Staged Van Compass Suspension Packages to choose from. 

All Stages provide the following benefits: 

  • Reduces the back and forth sway over obstacles
  • Enhances cornering stability
  • Controls large and small bumps more efficiently than the factory shocks
  • Reduces cross wind sway
  • The system is 100% bolt on with the provided mounts and hardware. All components are constructed of high quality materials here in the USA and are powder coated for durability and corrosion resistance.
STAGE 1 – VAN COMPASS SUSPENSION PACKAGE – SPRINTER 4X4 (2015+ 2500 OR 3500).
Price: $ 1,318.00 (Does not include labor).
This kit includes:
  • Front Fox shocks and mounting system
  • Front 4×4 Sprinter Sumo Springs
  • Rear Fox shocks
  • Dust boots

STAGE 2 – VAN COMPASS SUSPENSION PACKAGE WITH ADJUSTABLE REAR SHOCKS – SPRINTER 4X4 (2015+ 2500).

Price: $ 1,693.00 (Does not include labor).

This kit includes:

  • Front Fox shocks and mounting system
  • Front 4×4 Sprinter Sumo Springs
  • Rear Fox shocks with Compression Damping Adjustment
  • Dust boots
STAGE 3 – VAN COMPASS SUSPENSION PACKAGE – SPRINTER 4X4 (2015+ 2500)
Price: $ 1,918.00 (Does not include labor).
This kit includes:
  • Front Fox shocks and mounting system
  • Front 4×4 Sprinter Sumo Springs
  • Rear Fox shocks
  • Rear Add-A-Leaf kit
  • Dust boots
STAGE 4 – VAN COMPASS SUSPENSION PACKAGE VAN WITH ADJUSTABLE REAR SHOCKS – SPRINTER 4X4 (2015+ 2500)
Price: $ 2,293.00. (Does not include labor).
This kit includes:
  • Front Fox shocks and mounting system
  • Front 4×4 Sprinter Sumo Springs
  • Rear Fox Reservoir shocks with compression adjustment
  • Rear Add-A-Leaf kit
  • Dust boots
STAGE 5 – VAN COMPASS™ STRIKER 4X4 SPRINTER 2″ LIFT KIT WITH FOX SHOCKS AND FRONT SUMO SPRINGS (2015+ 2500 4WD SINGLE REAR WHEEL).
Price: $ 3,718.00 (Does not include labor)
The STAGE 5 kit combines the Van Compass’ STAGE 1 suspension package with Striker 4×4 Sprinter 2.0” suspension lift system. The kit improves the ride quality of the van, provides clearance for larger tires and offers additional ground clearance.

The Striker system retains the stock vehicle suspension geometry, payload rating and ride quality. All of the suspension lift system components are constructed of high quality materials here in the USA and are powder coated for durability and corrosion resistance.With this lift kit, 315/75/16 (35”) tires can be fitted with the following conditions met:

  • Removal of the front mud-flaps
  • Slight trimming of the rear of the front fender
  • Trimming of the front bumper and front inner fender well liner.
  • Minimum of a 9/16” (14mm) wheel spacer be installed on factory steel wheels with 54mm of offset or any other wheel that has comparable offset. This is for tire clearance between the inside of the tire and the strut and rear inner fender.
  • Note, this could be omitted with an additional 9/16” (14mm) offset and aftermarket wheels.
INCLUDED COMPONENTS:
  • Front 2.0” strut spacer – 1/4” hot rolled steel
  • Front 2.0” subframe drop spacers – 4140 heat treated chromoly
  • Motor mount 2.0” lift spacer – 3/16″ hot rolled steel
  • Transmission 2.0″ lift spacer – 3/16″ hot rolled steel
  • Steering shaft extension – 4140 heat treated chromoly
  • Low pressure power steering hose extension
  • Front brake line relocation brackets
  • Rear add-a-leaf spring pack
  • Rear sway bar links – 11/16″ x .120 DOM and 3/16″ hot rolled steel
  • Rear lower shock mounts – 1/8″ hot rolled steel
  • Rear bump stop drop brackets – 1/8″ hot rolled steel
  • Rear ride height headlight adjustment extension bracket – 1/8″ hot rolled steel
  • All necessary hardware
  • Front Fox shocks and mounting brackets
  • Front Sumo Springs
STAGE 6 – VAN COMPASS™ STRIKER 4X4 SPRINTER 2″ LIFT KIT WITH FOX ADJUSTABLE SHOCKS AND FRONT SUMO SPRINGS (2015+ 2500 4WD SINGLE REAR WHEEL).
Price: $ 4,093.00 (installation not included)
The STAGE 5 kit combines Van Compass’ adjustable rear shock STAGE 2 suspension package with Striker 4×4 Sprinter 2.0” suspension lift system. The kit improves the ride quality of the van, provides clearance for larger tires and offers additional ground clearance.The Striker system retains the stock vehicle suspension geometry, payload rating and ride quality. All of the suspension lift system components are constructed of high quality materials here in the USA and are powder coated for durability and corrosion resistance.With this lift kit, 315/75/16 (35”) tires can be fitted with the following conditions met:
  • Removal of the front mud-flaps
  • Slight trimming of the rear of the front fender
  • Trimming of the front bumper and front inner fender well liner.
  • Minimum of a 9/16” (14mm) wheel spacer be installed on factory steel wheels with 54mm of offset or any other wheel that has comparable offset. This is for tire clearance between the inside of the tire and the strut and rear inner fender. ** Sold separately 
  • Note; this could be omitted with an additional 9/16” (14mm) offset and aftermarket wheels.

INCLUDED COMPONENTS:

  • Front 2.0” strut spacer – 1/4” hot rolled steel
  • Front 2.0” subframe drop spacers – 4140 heat treated chromoly
  • Motor mount 2.0” lift spacer – 3/16″ hot rolled steel
  • Transmission 2.0″ lift spacer – 3/16″ hot rolled steel
  • Steering shaft extension – 4140 heat treated chromoly
  • Low pressure power steering hose extension
  • Front brake line relocation brackets
  • Rear add-a-leaf spring pack
  • Rear sway bar links – 11/16″ x .120 DOM and 3/16″ hot rolled steel
  • Rear lower shock mounts – 1/8″ hot rolled steel
  • Rear bump stop drop brackets – 1/8″ hot rolled steel
  • Rear ride height headlight adjustment extension bracket – 1/8″ hot rolled steel
  • All necessary hardware
  • Front Fox shocks and mounting brackets
  • Front Sumo Springs
  • Rear Fox Reservoir shocks with compression damping (CD) adjuster
Menu